Cambridge Audio AXR85-85 Watt Separate HiFi Stereo Reciever Featuring Built-In Phono Stage FM/AM Radio and Bluetooth 5.0 - Lunar Grey

Product Information

If your loudspeakers are equipped with two sets of terminals, then it is possible to connect them in the bi-wire configuration. The amps and receivers in the CX and AX series all use very high-quality speaker binding posts, which is pretty amazing to see on something as inexpensive as a CXA35. The front panel layout is also super clean and comfortable to figure out. As I said, they match in color, but the layouts are done in the same style to make mixing and matching within the lines no issue from a cosmetic standpoint. Let’s look at the different models to help you find the best match for your system. Cambridge Audio AXA35 The CXN V2 uses dual Wolfson WM8740 24-bit DACs. These are even better than the ones in the CXA81. But if you wanted to use it as a streaming source with a very high-end multi-thousand dollar DAC, it gives you both Toslink and coaxial digital outputs. Cambridge Audio also understands you may have more digital sources you want to run through the unit. So they give you a coaxial and Toslink digital input. For connecting it to your integrated amp or preamp, You have both balanced and RCA outputs. The final icing on the cake is that you can set up the CXN V2 to have either fixed or variable output. This means you could use it in the fixed output mode to run into your integrated amp or preamp. But if you just wanted a digital-only system, you can connect it directly to a power amp. The CXN V2 is just flat out an incredible product for the money. You can use it with any system and in a variety of ways. Conclusion The Cambridge Audio AX Series is being joined by a powerful all-rounder, as promised by the English hi-fi manufacturer Cambridge Audio. With an excellent price/performance ratio, the new Cambridge Audio AXR100D is set to prove a perfect start to the hi-fi world of “Great British Sound”. We recommend using Banana plugs with our units to establish a secure connection and ensure there are no loose strands of wire that may cause unwanted noise or interference.

Naturally for a receiver, the 85-watt AXR85 has FM/AM tuners, which is bolstered by a built-in Bluetooth receiver, three analogue RCA inputs, a phono stage and a 3.5mm aux input. Recording, subwoofer and 6.3mm headphone outputs are correct and present too. More uniquely at this price, the AXR85 boasts two zones for driving two pairs of speakers simultaneously. First, I’ll go over the things both product ranges have in common. With four models in each lineup, I thought it was pretty neat that Cambridge Audio decided to give both series the same cosmetic appearance, so you can easily mix and match them. All eight products come in a new lunar gray finish and have a floating look from the front. All of the amplifiers and the receivers use their classic toroidal power transformer for better sound.

Corporate / B2B

Bi-wiring sends the bass and treble frequencies down separate speaker cables, resulting in a clearer, more focused sound.

For those who want to enjoy music without being disturbed during the advanced hour, the new Cambridge Audio AXR100D has a headphone connection directly on the front.Two settings are possible which set the correct de-emphasis and tuning steps for either North America or Europe/Rest of the world. Note: Changing the tuner settings will clear all stored presets. When moving the unit to another region the Voltage Select switch must be set to the correct mains supply voltage by an authorized dealer.

The diagram below shows how to connect the AXR to an active subwoofer via the LFE/Sub input on the subwoofer. Prepare the speaker cords for connection by stripping off approximately 10mm (3/8”) or less of the outer insulation. More than 10mm could cause a short circuit. Twist the wires tightly together so there are no loose ends. Unscrew the speaker terminal, insert the speaker cable, tighten the terminal and secure the cable. Forget the AXR from your devices’ list of discoverable Bluetooth items and start the pairing process again. A Marantz PM6006 UK Edition will get you greater subtlety and refinement and it can also be partnered with more expensive speakers. Perhaps not surprising considering it is a little more expensive – and it started life a fair chunk more expensive.

Ensure that your Bluetooth device is in pairing mode and not already connected to another Bluetooth unit. Naturally, a matching infrared remote control is included in the scope of delivery to ensure convenient control in addition to operation directly on the device. If you are having problems connecting your Bluetooth device to the AXR, please try the following troubleshooting steps:

This unit has a built-in Phono preamplifier (Phono Stage), so if your turntable does not possess its own Phono Stage, you may connect the record player to the input on the rear of the unit marked 'Phono'. The front panel offers up a real headphone amp and another mini plug analog input. Bass, treble, and balance controls can be accessed via the menu or remote. This is the perfect amp to pair with a good set of bookshelf speakers to create an excellent starter analog audio system. With plenty of inputs for other sources, you get the excellent Cambridge Audio British sound. Cambridge Audio AXR stereo receiver AXR85 Use either the Volume Up/Down buttons on the remote control, or the Volume control on the front panel of your unit to change the volume level. The newly selected level will be indicated briefly on the front display.

When two or more devices are connected to a common ground through different paths, ground path noise, or a ground loop can occur. A potential difference between these two grounds can cause unwanted noise voltage in the circuit paths. Currents flow through these multiple paths and develop voltages which can cause damage, noise or 50Hz/60Hz hum/buzz.